Sharpening a Crosscut Handsaw | Woodworking Video Website

106 Views · Published on Fri, 28 June 2019 · Sharpening Tools

When and why do we sharpen saws to a crosscut? How do you go about doing it? Paul explains the reasoning behind them and goes through the full process of sharpening a crosscut saw. With a little practice, you will be able to sharpen crosscut saws with confidence. 

Related Videos

How to Setup, Use and Sharpen a Plough Plane | Woodworking Video...

How to Setup, Use and Sharpen a Plough Plane | Woodworking Video...

4 months ago
36,872

Need to run some grooves and not sure where to start? Paul shows how to sharpen and prepare the plough plane for use, before showing the basics of how to cut a groove.

How to Sharpen a Gouge | Woodworking Video Website

How to Sharpen a Gouge | Woodworking Video Website

4 months ago
114,384

Paul shows how to sharpen a gouge using his standard method, rocking the gouge side to side. He uses flat stones, in this case diamond stones in coarse (250), fine (600) and super fine (1200) grit, followed by a strop charged with buffing compound. Then you’re ready for carving.

A Woodworkers Tour of a Bit and Blade Sharpening Shop

A Woodworkers Tour of a Bit and Blade Sharpening Shop

4 months ago
13,519

Sharpening saw blades and woodworking bits is complex and requires sophisticated equipment and someone who knows how to set them up and run them. In this episode we visit a sharpening facility that can sharpen anything and can even custom make bits such as those needed in restoring antique furniture and restoring...

How to Sharpen a Chisel | Woodworking Video Website

How to Sharpen a Chisel | Woodworking Video Website

4 months ago
231,811

Chisels come from the manufacturer needing preparing or initialising as well sharpening. How do you check they are flat and get them sharp? Paul shows you the process he follows. This gets them to the level we need for crisp and accurate work. 

DIY Sharpening Jig for Chisels & Plane Blades

DIY Sharpening Jig for Chisels & Plane Blades

4 months ago
390,694

In this tutorial I show you how to make a sharpening jig that's great for sharpening chisels or a wood plane blade. Keeping woodworking tools sharp, like plane blades and chisels makes woodworking easier and gives better results. Making your own DIY sharpening jig is not hard or complicated and with a few tools...

How to Sharpen a Woodworking Handsaw | Woodworking Video Website

How to Sharpen a Woodworking Handsaw | Woodworking Video Website

4 months ago
910,423

Sharpening a saw can be one of the most daunting sharpening tasks for a woodworker. Paul Sellers tries to simplify this by showing how a simple rip cut pattern can be used for many crosscut saws as well. This is a great beginners guide to sharpening the essential saws.

Saw Sharpening with Micro Bevel | Woodworking Video Website

Saw Sharpening with Micro Bevel | Woodworking Video Website

4 months ago
28,456

Paul introduces a method he has used for a while now to prolong the sharpness of a saw and prolong the life of saw files. He shows how to put a micro bevel on the back of the teeth on a saw. 

Preparing and sharpening a woodworking chisel | Woodworking Video...

Preparing and sharpening a woodworking chisel | Woodworking Video...

4 months ago
1,327,735

In this video Paul Sellers shows you how to sharpen a chisel using simple and accessible techniques, a great skill for any woodworker.

Comments
 

You have
500
characters left.
  •  
  •